An A/V Perspective

Here's a picture of the A/V crew operating the two remote PTZ cameras and 'house' audio gear during the Veronica's gig at Australia Zoo.

The panel between them is the Panasonic Visual Mixing desk. The smaller monitors are the cameras and the screen on the top is what's currently showing on the big screen (a rather large Panasonic LED screen outside).

Home wireless

Today I finally set up my little public access wireless network at home. I've had a Mikrotik RB133 with RB52 and Senao radios laying around in an outdoor box for sometime now. Today I fixed up the roof cable run and installed it on my existing mast with Cisco 21dBi solid dish.

I used a homebrew 8dBi collinear omni-directional antenna for the public side (Senao 200mW/23dBm) radio - that puts output at around 30dBi in a 360°H/25°V area. I've set up a rudimentary hotspot service on the interface - I will set it up with PayPal etc shortly so the neighbors can gain ad-hoc internet access and not feel guilty for it. Not everyone wants to pay for a permanent connection unbelievable huh.

I attached the dish to the RB52 radio which is adjustable - so I'll set that down to give no more than the regulated 36dBi. I'm hoping to establish a Point-to-Point link to a friend in Buderim. Failing that maybe a repeater link via Kiel Mountain which sits in between. Mainly to share links and to muck around with routing etc.

I'll go for a cruise around the local area and see how much coverage my little 8dBi is providing - might even be able to pick it up at Kiel Mt with the laptop radio...

Progress

Wireless Network

How things move slower the lager the enterprise. Might have to start pushing to get things done faster and more efficiently in future.

I installed the last two Access Points in from the first batch of six we received all those months ago. I guess a fairly large hold up was the flaky firmware of the Symbol WS5100 I mentioned earlier. It's going very nicely now and I can't wait to start tweaking it and including it into a radius/ldap domain.

One AP was installed in the main warehouse and another under the Taj for coverage of the main hallways. Both work quite well using the supplied 6dBi collinear antennas.

Today a 9dBi collinear from the RFShop arrived with two made up cables to suit the AP300. Another three access points will be ordered shortly to provide coverage of the Foodcourt - using the new 9dBi, open area between the warehouse and Taj - using existing 10dBi yagi and indoors are at the Croc's Lair shop - AP with integrated antennas. That will be the coverage are for now with the possibility of a few more sites later on.

Telstra IP WAN

Almost 6mths in the making and the completion date is within sight. The last week I have sorted out the issue Mooloolaba Travel were having with running their VPN to Galileo running over the new Telstra WAN. It simply wasn't connecting. Discovered that the 1-to-1 NAT addressing that was also used for IPSec and PPTP traffic did not like traffic coming from the direction of Mooloolaba. So they changed it to a Many-to-1 NAT and things are looking good apart from frequent dropouts of the IPSec VPN which I believe are due to the 'keepalives' being blocked - so I turned them off and I will see what happens.

WhaleOne still hasn't been changed over. I had a 3hr crack at it today with all the information I had scrounged from Telstra and the 'net in general. Turns out that their NextG account hasn't yet been set up for use with the IP WAN. What happens is that the APN Name changes from 'telstra.internet' to 'telstra.corp' and this dictates the gateway used for the connection. Before this can occur the SIM card/Account needs to be set up so that the calls are allowed through or something along those lines anyway - the request goes to the Telstra Mobile team. Hopefully it will be fixed up by Tuesday next week.

Myth Frontend

Ages ago I talked about building a mythbox out of a Epia M10000. Well last weekend I finally did it. Epia support is quite good with linux these days, it was easy to set up Mythbuntu on the box and have it connect to the existing Soltek Qbic 3401 Mythbox. It runs okay apart from stutter after a channel change for about 5 minutes - I think more RAM will fix that.

I might upgrade my PC and use the old bits to build a better backend someday.

Shoveling Data

Because the 'zoo keeps many operations such as Graphic Design and Marketing in-house it generates a considerable amount of data on a day-to-day basis. It's a challenge to keep all this centralised and backed up. What I have done to achieve ample storage with basic redundancy is use a 'front end' NAS (Network Attached Storage) combined with a 'back end' NAS located elsewhere from the front end serving as the primary backup/archive.

The users access the front end NAS directly and generally work from its shares. This will change in future as I intend to access it as a iSCSI mount on a server. This NAS is a standard box housing JBOD and runs OpenFiler - you have probably read about it here earlier. The performance of this NAS is fairly ordinary but since its the network that presents the bottleneck its not something to be concerned about at this stage.

The back end NAS is a purpose built NAS from a company called Thecus, the N5200. It houses up to 5 SATA disks and supports RAIDs 0 thru to 10. I've set up this particular one with 5 x 750GB disks with RAID5. This provides enough space to backup the front end NAS at maximum capacity - about 2.5TB total.

I'm currently backing up the front end NAS via rsync to the Thecus. I had to find the rsync 'module' to install on the Thecus first as it doesn't support it by default however it wasn't a difficult process.

I will consider a Thecus 1U4500 NAS to go with a future Novell OES2 server - mounting it as an iSCSI volume for localised e-mail/data archiving. This will probably use another 5200 for backups.

Overall this provides us with a sizable storage pool at a very reasonable cost. I would like to implement a proper SAN however our needs aren't that great at this stage and a single form of redundancy appears to be acceptable to management. I'll always plan for the upgrade though.

OpenDNS Media Release

Thought I'd link this here:

Australia Zoo Conserves Bandwidth, Enjoys 100 Percent Network Uptime with OpenDNS

Now we're getting somewhere

It has been a hectic few weeks for me. Major projects for the period include the preparations for Steve Irwin Day, the roll out of the new Telstra Next IP managed WAN and the slowly but surely deployment of a campus wireless network.

I'm also feeding in various nifty services into the Zoo network - such as a OpenFire Jabber server, Twiki wiki, One or Zero Helpdesk and a few other things. Although I'm going to hold off on their deployment to users until I have a LDAP directory of some sort in place for all these things to authenticate against.

I updated the firmware on my Sony Ericsson P1i too - the difference in performance and stability is night and day - and it was pretty good to begin with! The Opera browser and unified messaging apps have been improved quite a bit. I'm actually encoding TopGear episodes to 3gp format on my MythTV box and watching them during my lunch breaks on it - I didn't think I'd be using it like that. nb: I could just watch the xvid/dvix encoded eps but they're a tad large...

Steve Irwin Day
Steve Irwin Day went well as far as the web servers went - they handled a doubling of traffic without a hitch. I will be sad to see the replication servers go, they've done their job well and I'm kinda proud of them. I'm starting an upgrade of massive proportions of the two main web servers this week - hopefully once I'm done they'll be more than capable of handling the load without the need for replicas. More on that later.

Telstra NextIP
I've cut everything over to the zoo's shiny new Telstra Next IP WAN (to use their marketing spin). Speeds are good, response times are awesome. I'm also using Telstra's Proxy Caches too as they're very snappy and are used by many - plus there's a discount on data used through them apparently.

As part of the WAN, each SHDSL connected site has a managed Cisco 1801 router and SHDSL TA, some yumcha device. The NextG connection is as per usual, but when it is connected it has a L2TP into the WAN and thus has access to all the same routes as the other sites. I've set up Mikrotik routers at each site including the NextG connection - the Zoo has 2 x Yawarra WRAP1-2s in a rack enclosure still, Mooloolaba has a Yawarra WRAP1-1 with wireless and WhaleOne has a Mikrotik RB133 in an indoor enclosure.

Campus Wireless
Not too much progress - the Admissions indoors area now as its own AP and the Taj (crocosium buidling) offices have coverage too. I'm waiting for a sparky to run new cabling to key points so I can locate a few more APs in good coverage areas. Also waiting on a $1k order for various bits and pieces from the RFShop so I can start making up tails and prepare the splitters for installation. Also getting some antennas from them that are cheap and appear to have excellent performance - looking forward to trying them out.

Symbol/Motorola WS5100

If you use these Wireless switches and are still running pre-3.0 firmware, UPDATE! Huge changes made and I suspect it's Motorola weaving its magic. I had all sorts of issues running with Spectralink VoWiFi sets and coverage - updated firmware to 3.0.2.0 and everything is happy now.

Other benefits of the firmware is that the CLI now mimics Cisco's IOS in many ways and the Java/Web interface is greatly improved - information is readily available and the controls make sense...

It's changed my view on this kit I was almost about to turf it in exchange for some Cisco gear or even Mikrotik (but I didn't really want to configure each AP individually).